Sun, 09 Dec 2001 00:00:00 +0200
agp/fsb and pci/fsb buses
I have a gigabyte ga-6oxc mainboard and a celeron 633.i can't adjust agp/fsb and pci... .is there anything to do with this problem? since windows doesn't open i can't see fsb...

Tue, 15 Jun 2004 00:00:00 +0300
FSB or to not FSB...
The better fsb, or the more mhz? currently im hoping to get the cpu to run at least... fsb. now thinking a little about it, i would be putting more stress on the system trying...

Wed, 10 Jun 2009 00:00:00 +0300
p4 2.4Ghz overclocking -> should i use the 533 FSB version or the 400 FSB...
Running at 533 FSb and the other at 400 FSB. Now I want to make use of these... northbridge, 478 cpu socket, 2 DIMMs) - MB is can run either 400 or 533 FSB - MB only...

Mon, 05 Feb 2007 00:00:00 +0200
Underclocking PIII 800 133 FSB chip to 100 FSB
On it. There is no voltage jumper. You configure the FSB and the multiplier in BIOS... . III). These day's, used PIII FSB 133 chips are CHEAPER than used PIII FSB 1...

Wed, 23 Feb 2005 00:00:00 +0200
Can 533Mhz FSB P4 be used on 400Mhz FSB MB?
This is probably a dumb question, but can a P4 with a FSB of 533Mhz or 800Mhz FSB... on a 400Mhz FSB motherboard? I have 1.5Ghz in it now and don't really want to replace...

Fri, 27 Dec 2002 00:00:00 +0200
440LX FSB capabilities
OK, for all you old schoolers out there.... Barring other issues, what kind of FSB can... around with has jumpers to set FSB up to 100 MHz. And on that note, would a PII 300...

Wed, 06 May 2009 00:00:00 +0300
Does high FSB matters anymore?
In the older days, it makes a lot of difference running on higher FSB. Technology has... rapidly so these days, does it matter to run on a "lower multi + high FSB" compared...

Thu, 11 Jun 2009 00:00:00 +0300
p4 2.4Ghz overclocking -> should i use the 533 FSB version or the 400 FSB...
Running at 533 FSb and the other at 400 FSB. Now I want to make use of these... northbridge, 478 cpu socket, 2 DIMMs) - MB is can run either 400 or 533 FSB - MB only...

Sat, 27 Jun 2009 00:00:00 +0300
Can't get passed 400 mhz fsb
Are: Vcore: 1.25 FSB: 400 PCIE Freq: 100 Strap to NB: 333 Dram Freq: 801 Dram voltage... is auto. Now I've tried to go up to 424 fsb with vcore 1.3, vtt 1.36, nb 1.36, cpu ...

Thu, 11 Jun 2009 00:00:00 +0300
p4 2.4Ghz overclocking -> should i use the 533 FSB version or the 400 FSB...
Running at 533 FSb and the other at 400 FSB. Now I want to make use of these... northbridge, 478 cpu socket, 2 DIMMs) - MB is can run either 400 or 533 FSB - MB only...